Submersible Water Pump, Tacklife 1/3 HP Automatic ON/OFF Electric Water Removal Pump, 4 Amp High-efficiency Pure Copper Motor with Thermal Protection-2550 GPH Maximum flow, Low Noise with Check Valve

Price: $144.99
Product prices and availability are accurate as of 2021-05-04 20:37:58 UTC and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product.
Availability: In Stock
In stock. Usually ships within 2 to 3 days.

Product Features

? ?Automatic ON/OFF Electric Water Removal Pump?- Tacklife's unique switching technology turns the pump on and off by sensing the presence of water, 10-inch power cord and comfortable handle structure, As long as the pump is plugged in, the pump can be left unattended. You don't have to worry about removing the water. It will move the water to within 1/4 inch of the ground ? ?1/3 HP High Power High Efficiency?- The smart pump can pump 42.5 gallons of water every minute, with a maximum flow rate of 2550 gallons per hour. 1950 gallons per hour on a 10-foot discharge lift, up to 25 feet in vertical height; provides the necessary power for any arduous task ? ?4 Amp Pure Copper Motor with Thermal Protection?- Pure copper motor can bring better and more lasting work to the pump,Overheat protection ensures that the pump will not be burned out,The bottom grid suction is designed to filter debris and has an anti-clogging force to remove the standing water from any enclosed environment ? ?Reinforced Sealing Thermoplastic Structure?- The pump features a durable thermoplastic structure and a compact design to ensure that the submersible pump can be used again and again without corrosion, Remove stagnant water from any environment, suitable for use in farms, swimming pools, fountains, flooded basements, and drainage in typical residential or commercial water transfer applications ? ?3/4 Inches Adapter Check Valve?- Each pump is equipped with a check valve to prevent reverse flow of water during use of the pump. It must be noted that the water level must be at least 1-1 / 4 inches to allow the pump to cycle, charge and operate. A water level of less than 1-1 / 4 inches does not allow the impeller to come in contact with the water and therefore does not pump water