CHUGGER PUMP CPSS-IN-1 Stainless Steel 115 Volt Inline Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 1/2” x Outlet 1/2” MPT, ETL-Certified, USFDA Food Compliant Materials

Price: $154.99
Product prices and availability are accurate as of 2019-10-16 05:56:45 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Comparable to the March 815-SS-Beer Pump, this 115-volt CHUGGER PUMP CPSS-IN-1 with a plug is the first pump made by brewers for home brewers like you. ETL-certified and made with USFDA food compliant materials, it’s a premium, sensible, and affordable alternative to expensive March pumps and has 25 percent more power with its 1/20 HP motor. Another benefit is stainless-steel heads that are interchangeable with existing March brand pump motors. This pump is not a self-priming pump so DO NOT RUN DRY—the CHUGGER PUMP head must be flooded with liquid prior to turning on the pump. It has been tested for safety and performance standards. Please check your electrical requirements before placing order. Must be wired by an electrician.

Product Features

ETL-Certified; USFDA Food Compliant Materials; UL Recognized; Sturdy 115-Volt (50/60HZ) Booster Pump With 55" Electric Cord with plug; Non-Submersible; Comparable to March 815-SS-Beer Pump Transfers Flow of Hot and Cold Liquids Between Brewing Vessels or Kettles; Cools Wort Via a Counter-Flow Chiller; Recirculates Ice Water for Quicker Chilling; Circulator Pump with 316 Stainless Steel Front and Rear Housing; Made by Brewers for Brewers Light Enough to Be Portable; High-Quality Stainless Steel Pump Head Eliminates Stripped Threads; Head is Interchangeable with Existing March Pump Motors; Magnetic Drive with Base, Teflon Thrust Washer, Clear Silicone O-Ring, and Ryton/Teflon Impeller Max Flow Rate of 7 GPM 26.5 LPM; 18.6-Feet 4.1M of Max Head to Handle Back-Pressure; Device is Capable of Handling Liquids of Different Temperatures Up to 250 Degrees F Inlet 1/2" MPT and Outlet 1/2" MPT Allows Configuration for Any Application; 1/20 HP (.04 HP) .029 KW; Motor Only: 1.7 Amps; Motor and Pump: 1.9 Amps; Motor Amp Rating: Full-Load Amps (FLA); This is NOT a Self-Priming Pump, DO NOT RUN DRY

Write a Review